Free Shipping on ALL Orders over $80.00!

Ask a Question
Ghostshield: Vapor-Tek 440

Ghostshield: Vapor-Tek 440

$264.88 $259.88 Sale

Moisture Vapor Barrier Epoxy Coating Vapor-Tek™ 440

A moisture vapor barrier coating designed to waterproof concrete floors. Controls moisture vapor emission rates up to 20lb/24 hr/1000ft prior to the application of hardwood flooring, carpet and tile.

Stops Moisture Vapor

Although it may seem like an investment this premium product has the unique ability to permanently control moisture vapor emission rates of up to 20lb / 24 hr / 1,000 ft. This product reduces the permeance of moisture vapor through concrete substrates to levels that are acceptable for the installation of hardwood flooring, carpet and tile. Flooring is protected and kept dry eliminating the risk of mold and mildew. The high performance and quick installation features of this system make it an ideal solution. Meets ASTM F3010 for vapor permeance.

Waterproof Concrete Floors

Supplied as a two-component kit and easily applied with a squeegee, nap roller or brush, the Vapor-Tek 440 can be used on a variety of horizontal concrete applications. Recommended for areas with high risks of moisture intrusion, hydrostatic pressure and vapor transmission such as basements and warehouse floors. For interior use only, grinding or etching of the surface is recommended prior to application. Keep in mind this product has a quick set up time. Once Part A and Part B are mixed you have 5-25 minutes to apply the product before it begins to harden. Mix in small batches following the 2 Parts A to 1 Part B mix ratio to extend the pot life.

For Use On:

  • Concrete Floors
  • Basement Floors
  • Garage Floors
  • Warehouse Floors

Not For Use On:

  • Exterior/Outdoor Applications

 

High Gloss Enhancement

A high gloss, clear finish makes this product unique. Used as a primer before installing a durable concrete coating system or flooring such as hardwood, tile or carpet. It is recommended a calcium chloride test be performed prior to application to determine if this product is right for you.

 

  • COVERAGE: 100 square feet per gallon
  • COATS: 1
  • FINISH: High-Gloss
  • PACKAGING: 3 gal kit

 Spec Sheet

Back to High Performance Coatings

QUESTIONS & ANSWERS

Ask a Question

  • 1200 sqft with expansion joints.Do you need to fill in expansion joints?

    It is recommended to fill the expansion joints prior to putting down the epoxy.

  • Is this a 3 gallon kit. I need coverage for approx. 450 sq/ft

    This is a 3 gallon kit, coverage is 50 to 150 sqft per gallon depending on thickness. So it should cover 450 square feet at 10 mils thickness.